Announcement

Collapse
No announcement yet.

So my WIFE told me to build a shop!!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • So my WIFE told me to build a shop!!!!!

    So here it is, its 24x40 I am finishing up the outlets as yall are looking. It is a 200amp service and I will have 3 220 circuits and 7 110 circuits. welders are still in my garage because I am still using them but here some pictures. Before yall say anything about the tree, I was not planning on putting my shop in that exact spot but because the grade of where I wanted it would have been alot more concrete. The picture of my bobcat is there just becuase I just repainted it. Thanks for looking and yes my wife told me to build the shop becuase she wanted the garage back.





    syncrowave 250
    millermatic 140 with spool gun
    350 dully with 225
    spectrum 375
    lateral band saw
    14in vertical band saw
    14in cold cut saw
    and now a 24x40 shop

    ALL THE STUFF I HAVE BUILT

    www.facebook.com/studiostevens

  • #2
    here are some more







    syncrowave 250
    millermatic 140 with spool gun
    350 dully with 225
    spectrum 375
    lateral band saw
    14in vertical band saw
    14in cold cut saw
    and now a 24x40 shop

    ALL THE STUFF I HAVE BUILT

    www.facebook.com/studiostevens

    Comment


    • #3






      syncrowave 250
      millermatic 140 with spool gun
      350 dully with 225
      spectrum 375
      lateral band saw
      14in vertical band saw
      14in cold cut saw
      and now a 24x40 shop

      ALL THE STUFF I HAVE BUILT

      www.facebook.com/studiostevens

      Comment


      • #4
        syncrowave 250
        millermatic 140 with spool gun
        350 dully with 225
        spectrum 375
        lateral band saw
        14in vertical band saw
        14in cold cut saw
        and now a 24x40 shop

        ALL THE STUFF I HAVE BUILT

        www.facebook.com/studiostevens

        Comment


        • #5
          Sweet!!!

          Any chance she might want a machine or two back as well?
          MM200 w/spot controller and Spoolmatic 1
          Syncrowave 180 SD
          Bobcat 225G Plus LPG/NG w/14-pin*
          *Homemade Suitcase Wire Feeder
          *HF-251D-1
          *WC-1S & Spoolmatic 1
          PakMaster 100XL
          Marquette "Star Jet" 21-110
          http://www.millerwelds.com/images/sm...rolleyes.png?2

          Comment


          • #6
            Originally posted by duaneb55 View Post
            Sweet!!!

            Any chance she might want a machine or two back as well?
            she just wanted a place to park and carve stuff when she is bored
            syncrowave 250
            millermatic 140 with spool gun
            350 dully with 225
            spectrum 375
            lateral band saw
            14in vertical band saw
            14in cold cut saw
            and now a 24x40 shop

            ALL THE STUFF I HAVE BUILT

            www.facebook.com/studiostevens

            Comment


            • #7
              Had to try.

              Carve as in wood?
              MM200 w/spot controller and Spoolmatic 1
              Syncrowave 180 SD
              Bobcat 225G Plus LPG/NG w/14-pin*
              *Homemade Suitcase Wire Feeder
              *HF-251D-1
              *WC-1S & Spoolmatic 1
              PakMaster 100XL
              Marquette "Star Jet" 21-110
              http://www.millerwelds.com/images/sm...rolleyes.png?2

              Comment


              • #8
                Originally posted by duaneb55 View Post
                Had to try.

                Carve as in wood?
                well she can do wood but she does eps foam kinda like styrofome but not hahahah
                here is the last big thing she did after she was done carving we glassed it and painted it.

                syncrowave 250
                millermatic 140 with spool gun
                350 dully with 225
                spectrum 375
                lateral band saw
                14in vertical band saw
                14in cold cut saw
                and now a 24x40 shop

                ALL THE STUFF I HAVE BUILT

                www.facebook.com/studiostevens

                Comment


                • #9
                  In seven or eight hundred years, the tree might be big enough to drive through like the Mariposa Grove:

                  http://www.yosemitehikes.com/souther...unnel-tree.htm

                  Nice shop (nice wife too). I have always wanted a building like that!

                  -Ian
                  :~ATTITUDE MAKES THE DIFFERENCE!!!:

                  Comment


                  • #10
                    Congrats! Your plan to make her want you out of the garage worked! Very sneaky...
                    Professional firefighter (retired). Amateur everything else I try to do...
                    Oh yeah: GO BIG RED!

                    Comment


                    • #11
                      Originally posted by strube1369 View Post
                      Congrats! Your plan to make her want you out of the garage worked! Very sneaky...
                      it only took a year
                      syncrowave 250
                      millermatic 140 with spool gun
                      350 dully with 225
                      spectrum 375
                      lateral band saw
                      14in vertical band saw
                      14in cold cut saw
                      and now a 24x40 shop

                      ALL THE STUFF I HAVE BUILT

                      www.facebook.com/studiostevens

                      Comment


                      • #12
                        Originally posted by nrhmarine7 View Post
                        well she can do wood but she does eps foam kinda like styrofome but not hahahah
                        here is the last big thing she did after she was done carving we glassed it and painted it.

                        Wow! Very talented AND generous. Awesome woman!
                        MM200 w/spot controller and Spoolmatic 1
                        Syncrowave 180 SD
                        Bobcat 225G Plus LPG/NG w/14-pin*
                        *Homemade Suitcase Wire Feeder
                        *HF-251D-1
                        *WC-1S & Spoolmatic 1
                        PakMaster 100XL
                        Marquette "Star Jet" 21-110
                        http://www.millerwelds.com/images/sm...rolleyes.png?2

                        Comment


                        • #13
                          Really nice shop!!! I envy the empty space. In my shops I can barely find the floor most of the time. A little critique of what I might have done differently. If it were possible I'd have taken the chain saw to the tree before I built as I've dropped one on a building in the past(it was not a happy day) Where you are it is probably not an issue but for here(in the North) I'd have looked at stronger rafters for snow load(also had buildings collapse under the weight of wet spring snow and I now try to over-build everything) I would also have put my power distribution up near the top of the wall and dropped down for the outlets,switches etc. You are likely much more disciplined than I am and will not hang anything(especially your ground clamp) on the conduit. In addition in my shop things have been known to hit the walls,occasionally the ceiling and rarely the floor(when I can find it) which might damage the conduit. All in all though a really nice shop and a talented and understanding wife. Who could ask for more.
                          Meltedmetal
                          ---Meltedmetal

                          Comment


                          • #14
                            Jelous it is beautiful. I dont know if my envy is for your shop or your wife more
                            Never Satisfied

                            Millermatic 211
                            Maxstar 150STL
                            Metabos
                            Kennedy Maintenance Pro Full
                            Makita Cordless 18v Li-Ion
                            Stihl TS 420

                            [email protected]

                            Comment


                            • #15
                              Originally posted by Meltedmetal View Post
                              Really nice shop!!! You are likely much more disciplined than I am and will not hang anything(especially your ground clamp) on the conduit.
                              Meltedmetal
                              HAHAHAHAHA yea I hear ya and I will do my best not to use my conduit that way ahahahah The tree will be done by somebody else so I will not be responsible.
                              syncrowave 250
                              millermatic 140 with spool gun
                              350 dully with 225
                              spectrum 375
                              lateral band saw
                              14in vertical band saw
                              14in cold cut saw
                              and now a 24x40 shop

                              ALL THE STUFF I HAVE BUILT

                              www.facebook.com/studiostevens

                              Comment

                              Working...
                              X