dynasty 200 limits pushed how far?

[pro mod steve]

I know all machines have thier limits. But for just the **** of it what is the thickest aluminum you've welded sucessfully with a dynasty 200? Please specify if external pre heat source was involved.This has nothing to do with anything other than my brain on overtime thinking.

[SundownIII]

Dumb azz question.

I'd suggest you buy one and find out for yourself.

[duaneb55]

Hey SundownIII, can you clean out your PMs so I can send you one? Say's you're full up.

[pro mod steve]

thank you sir

Thank you sundown I really apreciate your technical input it is very useful. back to the op it was just a random question out of curiosity. I was just curious how much some of the others who have one have got away with

[FusionKing]

I know I've done over 1/2" dozens of times.
Anyone who has replaced a skeg has done the same thing as well. They are more like 5/8" in the middle on many.
IMO it is more about the mass and the type of joint.
I have welded out in the middle of the bottom of 1/4" thick hulls with a bulkhead made in a "t" right above when it was cracked. Good amount of mass there.
I can be a bit too light in the pants, but if you let it set a bit and cook before you move, you can still do a lot.