Tweet
What is the size of the coupons used on the Miller Road Show Trucks?
Thank you in advance.
Good Luck,
Bob
Thank you in advance.
Good Luck,
Bob
-
Millermatic 252 w/30A
Big Blue Air Pak
Ellis 3000 Band Saw
Trailblazer 302 Air Pak w/ Wireless Remote
8-RC
Dynasty 200 DX
XMT 350 MPa w/S-74 MPa Plus
Millermatic 211
Passport Plus
Spectrum 625 X-TREME
Lincoln SA-200 Blue Tint Red Face '63
2-Lincoln SA-200 Red Face '68
SA-200 Black Face '59
SA-200 Green Lite '84
SA-200 Green Lite '80
SA-200 Red Face '69
SA-200 Red Face '66
SA-200 Green Lite '81
'70 Black Face Round Barrel -
Looks like 5" or 6" pipe in my pics...BobBob Wright -
Thanks but I was thinking of the flat bar they use.
I'm thinking inch and half by 4 inches and in the different guages.
But I'm not sure.
Thanks,
BobMillermatic 252 w/30A
Big Blue Air Pak
Ellis 3000 Band Saw
Trailblazer 302 Air Pak w/ Wireless Remote
8-RC
Dynasty 200 DX
XMT 350 MPa w/S-74 MPa Plus
Millermatic 211
Passport Plus
Spectrum 625 X-TREME
Lincoln SA-200 Blue Tint Red Face '63
2-Lincoln SA-200 Red Face '68
SA-200 Black Face '59
SA-200 Green Lite '84
SA-200 Green Lite '80
SA-200 Red Face '69
SA-200 Red Face '66
SA-200 Green Lite '81
'70 Black Face Round BarrelComment
-
If I recall correctly they were probably about 1 1/4- 1 1/2 wide and about 6" in length.Comment
-
Thank you, guys, for your input.
Good Luck,
BobMillermatic 252 w/30A
Big Blue Air Pak
Ellis 3000 Band Saw
Trailblazer 302 Air Pak w/ Wireless Remote
8-RC
Dynasty 200 DX
XMT 350 MPa w/S-74 MPa Plus
Millermatic 211
Passport Plus
Spectrum 625 X-TREME
Lincoln SA-200 Blue Tint Red Face '63
2-Lincoln SA-200 Red Face '68
SA-200 Black Face '59
SA-200 Green Lite '84
SA-200 Green Lite '80
SA-200 Red Face '69
SA-200 Red Face '66
SA-200 Green Lite '81
'70 Black Face Round BarrelComment
-
Hey Bob,
The ones I get for shows are 1 1/2" X 4" to 6".
I prefer the longer 6" ones especially for tig. They don't heat up so fast, keeping the weld more consistant.
The last batch I got ended up 1 1/2" X 5 3/4". They just set the shear to get as many out of a sheet as possible.
Hope this helps!
AndyComment
Comment