Announcement

Collapse
No announcement yet.

30 A spool gun with 302 trailblazer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cruizer
    replied
    Take a look at this MIG (Solid Core) Welding Calculator.
    http://www.millerwelds.com/resources...calculator.php
    Plug in what your doing and it will give you a stetup.

    This and to figure out inch/minute, set your gun on a number, hit the trigger for 1 second, measure that amount in inches and multiply by 60. That'll give you a good guesstimation to go by.

    Leave a comment:


  • TexasSilhouette
    replied
    Take a look at this MIG (Solid Core) Welding Calculator.
    http://www.millerwelds.com/resources...calculator.php
    Plug in what your doing and it will give you a stetup.

    Enjoy.

    Leave a comment:


  • badger76
    replied
    d** fellas just getting some input the night before so i dont have to get out there and keep f&%$&% goin back to the machine! wheres the love?

    Leave a comment:


  • c wagner
    replied
    Originally posted by cruizer View Post
    Don't think your going to get a satisfactory result running stainless off that machine.
    There are some wires that you can switch in the machine to change the GMAW arc to better suit stainless or aluminum... but if you don't know how to figure out the settings yet maybe your not ready to mess with wires inside the machine.

    Leave a comment:


  • JSFAB
    replied
    Please confirm this for me,,,,, You just spent $5000 + for equipment, and you are not capable of running test pieces, to get your settings correct?????

    Leave a comment:


  • cruizer
    replied
    Don't think your going to get a satisfactory result running stainless off that machine,

    For one thing your going to need a Stainshield mix and the settings are reasonably close to the supplied. If you run straight Argon off the 302, the weld will just be a mess.

    Leave a comment:


  • badger76
    replied
    how about stainless?

    Leave a comment:


  • badger76
    replied
    Originally posted by cruizer View Post
    Say if your running 035" wire then 7 on your gun and 23 volts on the machine

    045" 3- 5 on the gun and 26 volts on the machine
    thanks man!!

    Leave a comment:


  • cruizer
    replied
    Say if your running 035" wire then 7 on your gun and 23 volts on the machine

    045" 3- 5 on the gun and 26 volts on the machine

    Leave a comment:


  • badger76
    started a topic 30 A spool gun with 302 trailblazer

    30 A spool gun with 302 trailblazer

    hey guys im pretty new to the site, like every body else im trying to obtain a little info and maybe be able to give a little..question is -- anybody tell me the settings for that gun to the 302 on lets say 4043 alum wire on 1/4 inch stuff.
Working...
X