Tweet
Hi I plan on ordering a new dynasty through my local. They get direct from miller (it will be sent to my LWS) I was just wondering if there is any chance of getting the old Dynasty 200dx, or is it fairly safe to assume it is going to be the new one?
-
-
Verify the Miller part number of the machine you want to order before money changes hands.
Griff -
If your LWS don't have one at another store you will get the new one. When I got mine last week I pulled the cover off it to replace the factory cord with a longer one, and noticed a sticker in there that said 03/05/09... thats pretty new.
Dynasty 200 DX runner
Sync 350 LX
XMT 300 w/D74 and roughnecks
Hobart 135
ESAB PowerCut 875 plasmaComment
-
Good advice...if you don't take it you could get the old one insteadOriginally posted by griff01 View Post
www.facebook.com/outbackaluminumwelding
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller WC-115-A
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
Comment
-
Ya that would be new enough that its the new model. This is in Canada not that is should make much of a difference. But the price is supposed to be heavily discounted (getting a price next week) I just didnt want it to get here and be like oh. . . its the old version I dont want it.
Verify the part number? or the serial number? I didnt know that there is a different part number.Comment
-
Originally posted by pgdsm View Post
serial #....you are already making me suspicious
www.facebook.com/outbackaluminumwelding
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller WC-115-A
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
Comment
-
Don't they have a model just for CA? I seen something about it in the manual.Dynasty 200 DX runner
Sync 350 LX
XMT 300 w/D74 and roughnecks
Hobart 135
ESAB PowerCut 875 plasmaComment
-
Yea prolly lower emisionsOriginally posted by wrenchnride247 View Post
www.facebook.com/outbackaluminumwelding
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller WC-115-A
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
Comment
-
Making you suspicious how? it was posted above to check the part number before money exchanges hands. All serial numbers past lj280222l are the new ones.Originally posted by FusionKing View PostComment
-
I found it. It's called the "CE" model, and has some Canadian standards approval (like our UL listing)Originally posted by FusionKing View PostYea prolly lower emisionsDynasty 200 DX runner
Sync 350 LX
XMT 300 w/D74 and roughnecks
Hobart 135
ESAB PowerCut 875 plasmaComment
-
ok so my next question would then be does the serial number apply to the canadian models as well?Comment
-
Suspicious that they are going to attempt to sell you an older one when you use the term "heavily discounted"...there could be plenty of older stock out there...that is how I got my 700...but I knew that at the time.Originally posted by pgdsm View Post
It happens and it has happened to members of this board. just sorta supporting the idea of you being a good buyer and not getting stuck with a machine you do not want.
When I bought my latest 200DX I had them verify the exact serial # they were shipping.
www.facebook.com/outbackaluminumwelding
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller WC-115-A
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
Comment
-
well I will see if I can get them to confirm the serial number before I have them ship it.Comment
-
I knew nothing of the "new firmware" improvements to my Dynasty until 1 week after I purchased it and was searching the threads on this forum.
I went to the resourses and found the serial number change/sequence and verified mine to be "new".
If it were me I would imediately write a letter to the LWS and tell them you will "only" accept a Dynasty that has the updated firmware and that you would like "confirmation" prior to obligating your purchase. Likely a non event.
TimsigpicRetired Elevator Consrtructor Local 19 IUEC
AK bush pilot (no longer in AK) too old and no longer bold)
Chaplain CMA chapter 26
Dynasty200dx (new and loving it)
MM-252 (NEW AND LEARNING IT)
Hypertherm PM-45
Miller 140 mig 110v
Vtwin builderComment
-
Get a 2009 Miller catalog (or look it up on this site) and you will see there are usually several part numbers for a given machine. The various part numbers represent different accessory packages and different voltage setups and probably something else I'm forgetting.Originally posted by pgdsm View Post
Griff
P.s.
Just looked up the Dynasty 200 on this site. Literature shows five stock numbers ( Miller uses stock numbers instead of part numbers) for the Dynasty 200.
GriffComment
Comment