Problem with Lincoln Pro- Core 100

[pittcrew]

Just bought a Pro- Core 100 Mig Welder. It is used and i cannot get it to feed wire. Everything seems to work but it just doesn't feed it. You can hear the click but it doesn't feed. Anyone knows anything lemme know thanks

Should of went to lincoln but they do'nt have a message board so i had to come to the next best place

thanks

[Handy560]

Red?

Next best place? Maybe you came to a better place...

[MD Welding]

Trade it in for something blue!

Check to see if the feeder motor is getting voltage when you hit the trigger. If it is then it may be the motor.

Are the rollers turning?

If they are then it may be a liner issue.

[Bert]

Mike is right, open up the case, look to see if the rollers are turning.
If it is, check the tension adjustment, may be too tight, go the wire pinched or something. Your wire on the tip might be fused, take off the tip...
Nah, just sell it and buy blue!!! After you try that, like Mike said, maybe someone stepped on the cord and bent the liner...

[pittcrew]

thanks guys but for $20 u cant beat it my next welders are going to be blue

[Camaro Zach]

I have had the same problem with my pro core. Just turn the wire speed knob back and forth a few times and it should start feeding wire. Worked for me when I had it lol

[Broccoli1]

thanks guys but for $20 u cant beat it my next welders are going to be blue

Clarke's are blue

[fun4now]

pittcrew: thanks guys but for $20 u cant beat it
you can if it doesn't work. i can get a paper wait for $3 at office depot.
my next welders are going to be blue
now your thinking.

[Bert]

you can if it doesn't work. i can get a paper wait for $3 at office depot.
Good Point!!!!!!!!!! But why spend $3.00 when one of your test pieces will do???

[fun4now]

But why spend $3.00 when one of your test pieces will do???
tried that for a wile, but kept forgetting to wait for them to cool down first.

[Bert]

lmao!!! So did you lose all your receipts to write off???

[fun4now]

lost the hole desk. good thing my Miller's never break down, no need for the recept.

[Bert]

OMG!!!!!!!!!!!! How P*****sd off was the wife????!!!!!!!
Oops, ummm....Pittcrew, did you find out the problem??

[pittcrew]

yes thanks to all and my next welders is going to a miller

[Bert]

So what was the problem????