Stainless Steel project Pics

[phaxtris]

thats why you go fast

ill take some picture of the stuff we do fusion on at work, between 18g-22g ss, so long as you move fast it doesnt warp, especially if you are fusing something as thick as 1/16th

[Fat-Fab.com]

yea im kind of the same way

ive screwed around with the pulsar a few times however i find it far to slow when fusing, definatly much faster with just regular current, but you dont get that cool 'you added rod' look

I was talking with the guru at the airgas store about the pulse he said this was the perfect project to use it on I says why He tells me that hte point of the pulser is to reduce heat input and we all know about heat and stainless so I used it and it definatly redused the size oh the HAZ part cooled off much faster as well plus it had that cool look too.

TJ

[phaxtris]

It did get to me as well I walk in someones house and I see photos hanging on the wall crooked or a couch not streight to a wlaa and I walk ofer and nudge them I hope they don't catch me diong it.lol

Yes I was using the pulser on the Dynansty thats slick
TJ

yea im kind of the same way

ive screwed around with the pulsar a few times however i find it far to slow when fusing, definatly much faster with just regular current, but you dont get that cool 'you added rod' look

[Fat-Fab.com]

it looks cauk eyed as **** in no 4, i realise that is how its soposto be, but man that would drive me nuts, i would have to toss it in a box as soon as i was done so that i didnt have to look at the cauk eyed ness

why does it look like you used the pulsar ? and you missed in no6/7 !

do you have to acid clean those before sending to the customer, or do they go as is ?

EDIT, NVM i just read you skotch brite'd it

It did get to me as well I walk in someones house and I see photos hanging on the wall crooked or a couch not streight to a wlaa and I walk ofer and nudge them I hope they don't catch me diong it.lol

Yes I was using the pulser on the Dynansty thats slick
TJ

[Fat-Fab.com]

How thick is the material?

16 g or 1/16"

tj

[weld-tek]

i zoomed in

[phaxtris]

it looks cauk eyed as **** in no 4, i realise that is how its soposto be, but man that would drive me nuts, i would have to toss it in a box as soon as i was done so that i didnt have to look at the cauk eyed ness

why does it look like you used the pulsar ? and you missed in no6/7 !

do you have to acid clean those before sending to the customer, or do they go as is ?

EDIT, NVM i just read you skotch brite'd it

[weld-tek]

how so?

TJ

i will let some of the other guys answer for me,i bet they catch it.

[Fat-Fab.com]

it may be the angle the picture was taken at, but the box seems to be severely out of square.

In one direction they are the bottom the side with 5 holes is botttom and the angle to the formed side is 3.5 deg.

[burninbriar]

How thick is the material?

[bretsk2500]

how so?

TJ

it may be the angle the picture was taken at, but the box seems to be severely out of square.

[Fat-Fab.com]

no 4 kinda caught my eye.

how so?

TJ

[Fat-Fab.com]

They are 3.75" tall and 3.5" square ID
I think it is pic 9 that shows the bottom and how the side extends passed the bottom waiting for me to cut it off with the porta band.

I have not found the pic of them finished
I put a brush finish on them with the purple scotch bright pads using a grout float as a backer for the scotch bright
I had a local sheetmetal shop punch the holes and form them I did the welding and the fit up

TJ

[weld-tek]

no 4 kinda caught my eye.

[Fat-Fab.com]

Job I did last month
used my Dynanasty 200 dx set on 37 amps with 3/32 cereated (sp)
and a foot amp control used no filler unless i had to.
Pic 3 showes it sitting at a slight angle
the base are angled to the sides some at 3 deg some as much as 10 deg
they are mounting brackets for 3.5" X 3.5" wood guard rail post
TJ