Announcement

Collapse
No announcement yet.

bucket list part

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • aametalmaster
    replied
    Cool

    Leave a comment:


  • Electric4Life
    replied
    I have no idea. I'm paid to know tube diameter, wall thickness and bend angle. If I were to guess, maybe TT or short course. I've seen some drift cars with this stuff too.
    Mac. The outside is entirely welded out. From the center out between every tube and back to the outlet. If you sealed all the inlets and placed it flat on the bench it, the inside would hold water just above the point on the inside.

    Leave a comment:


  • MAC702
    replied
    Cool! Can parts of it be welded up from the inside?

    Leave a comment:


  • ryanjones2150
    replied
    Those collectors can be tough to seal up. Looks good. What’s it going on?

    Leave a comment:


  • Electric4Life
    started a topic bucket list part

    bucket list part

    Had an opportunity to put this together last week
    Attached Files
Working...
X