Announcement

Collapse
No announcement yet.

73-74 powerwagon t case shifter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 73-74 powerwagon t case shifter

    Any body have some pics and insite on how the np205 shifter is setup on or under the trans crossmember On a 73 74 w200?
    I have the bracket shift arm and lever from a 71 w200 witch may be different I don't know ?My truck is a 78 w200 and I swapped in a 205 and 4spd and got rid of the 203 coupled 4spd I've tried flipping the bracket and everything the cross members are dodge and all bolted in with some drilling after I set the angles just need to know if I need a diff bracket and linkage arm make it or find it used figure I try here before I go on a dodge site ?thanks D

  • #2
    Sorry don't have something that old --- I'm working on a 85 W350 Crew Cab with a NP-435 --it uses a direct mounted shift lever (on the top).............these old power wagons are going up in value.
    ESAB TIG 252 with Miller CoolMate
    Spectrum 875
    Diversion 180
    Oxy-A (Harris, ESAB, Ox Weld)
    Miller 252
    MM 211
    CST 280
    Trailblazer - Kubota

    http://www.blackdiamondblooms.com/

    Comment


    • #3
      I ended up cutting the 71 shifter mount and mounting on the crossmember were they were origionally I got some pics off of ramcharger central website they know there stuff in that forum if u have any issues with yours .
      Somone has to keep these old dodges running lol ..

      Comment


      • #4
        In the middle of a D350 to crew W350 build myself
        Dynasty 400 wireless
        Coolmate 3.5
        Sw320 speedway
        Ck flex lock 230
        4 victor flow meters
        2 Flametech Duel flowmeters
        2 genuine miller torch buttons
        A$$ loads of tungsten
        XMT 350 CC/CV
        S74DX feeder
        Stick leads from here to China
        A30 Spool gun
        WC24
        Langmuir crossfire hobby table
        Everlast powerplasma 100 w hypertherm torch
        Harris O/A
        Pet raccoon
        I'm just a peckerwood in the boonies with fancy welding equipment

        Comment


        • #5
          A welding cart build got in the way of progress. Getting started back on it now
          Dynasty 400 wireless
          Coolmate 3.5
          Sw320 speedway
          Ck flex lock 230
          4 victor flow meters
          2 Flametech Duel flowmeters
          2 genuine miller torch buttons
          A$$ loads of tungsten
          XMT 350 CC/CV
          S74DX feeder
          Stick leads from here to China
          A30 Spool gun
          WC24
          Langmuir crossfire hobby table
          Everlast powerplasma 100 w hypertherm torch
          Harris O/A
          Pet raccoon
          I'm just a peckerwood in the boonies with fancy welding equipment

          Comment


          • #6
            I love those old dodge trucks like that. Please don't repaint it, you'll ruin the patina.

            Comment


            • #7
              Originally posted by ryanjones2150 View Post
              I love those old dodge trucks like that. Please don't repaint it, you'll ruin the patina.
              Its go to much patina on the drip rail. I'm gonna have to deal with that.
              Dynasty 400 wireless
              Coolmate 3.5
              Sw320 speedway
              Ck flex lock 230
              4 victor flow meters
              2 Flametech Duel flowmeters
              2 genuine miller torch buttons
              A$$ loads of tungsten
              XMT 350 CC/CV
              S74DX feeder
              Stick leads from here to China
              A30 Spool gun
              WC24
              Langmuir crossfire hobby table
              Everlast powerplasma 100 w hypertherm torch
              Harris O/A
              Pet raccoon
              I'm just a peckerwood in the boonies with fancy welding equipment

              Comment


              • #8
                Ok, but just the drip rail.

                Comment


                • #9
                  Looking nice so far !What t case and trans are you using I know it’s been a while ?
                  D

                  Comment


                  • #10
                    Click image for larger version

Name:	20190907_184215.jpg
Views:	46
Size:	76.8 KB
ID:	601823Click image for larger version

Name:	20190717_210000.jpg
Views:	42
Size:	67.0 KB
ID:	601825
                    Attached Files
                    Dynasty 400 wireless
                    Coolmate 3.5
                    Sw320 speedway
                    Ck flex lock 230
                    4 victor flow meters
                    2 Flametech Duel flowmeters
                    2 genuine miller torch buttons
                    A$$ loads of tungsten
                    XMT 350 CC/CV
                    S74DX feeder
                    Stick leads from here to China
                    A30 Spool gun
                    WC24
                    Langmuir crossfire hobby table
                    Everlast powerplasma 100 w hypertherm torch
                    Harris O/A
                    Pet raccoon
                    I'm just a peckerwood in the boonies with fancy welding equipment

                    Comment


                    • #11
                      I Am using a RTO 6610 fuller and a Rockwell T223 transfer case.
                      Dynasty 400 wireless
                      Coolmate 3.5
                      Sw320 speedway
                      Ck flex lock 230
                      4 victor flow meters
                      2 Flametech Duel flowmeters
                      2 genuine miller torch buttons
                      A$$ loads of tungsten
                      XMT 350 CC/CV
                      S74DX feeder
                      Stick leads from here to China
                      A30 Spool gun
                      WC24
                      Langmuir crossfire hobby table
                      Everlast powerplasma 100 w hypertherm torch
                      Harris O/A
                      Pet raccoon
                      I'm just a peckerwood in the boonies with fancy welding equipment

                      Comment


                      • #12
                        Long as you got it that far apart might as well go swivelframe in the fine old tradition.

                        What are you using for axles?

                        Comment


                        • #13
                          Originally posted by Franz© View Post
                          Long as you got it that far apart might as well go swivelframe in the fine old tradition.

                          What are you using for axles?
                          Just a Dana 80 rear and king pin 60 front. Nothing fancy
                          Dynasty 400 wireless
                          Coolmate 3.5
                          Sw320 speedway
                          Ck flex lock 230
                          4 victor flow meters
                          2 Flametech Duel flowmeters
                          2 genuine miller torch buttons
                          A$$ loads of tungsten
                          XMT 350 CC/CV
                          S74DX feeder
                          Stick leads from here to China
                          A30 Spool gun
                          WC24
                          Langmuir crossfire hobby table
                          Everlast powerplasma 100 w hypertherm torch
                          Harris O/A
                          Pet raccoon
                          I'm just a peckerwood in the boonies with fancy welding equipment

                          Comment


                          • #14
                            Click image for larger version

Name:	20190919_192143.jpg
Views:	24
Size:	76.3 KB
ID:	602605Click image for larger version

Name:	20190915_012558.jpg
Views:	20
Size:	57.1 KB
ID:	602606Click image for larger version

Name:	20190907_184222.jpg
Views:	21
Size:	81.4 KB
ID:	602607
                            Dynasty 400 wireless
                            Coolmate 3.5
                            Sw320 speedway
                            Ck flex lock 230
                            4 victor flow meters
                            2 Flametech Duel flowmeters
                            2 genuine miller torch buttons
                            A$$ loads of tungsten
                            XMT 350 CC/CV
                            S74DX feeder
                            Stick leads from here to China
                            A30 Spool gun
                            WC24
                            Langmuir crossfire hobby table
                            Everlast powerplasma 100 w hypertherm torch
                            Harris O/A
                            Pet raccoon
                            I'm just a peckerwood in the boonies with fancy welding equipment

                            Comment


                            • #15
                              I'm going to say, your project is moving right along. I don't mind saying, your doing some nice work. Heck, and it's clean. I like clean. While this level of 4x4 is beyond my depth, I'm in marvel at the drive shafts. Those are beasts.

                              Comment

                              Working...
                              X